Анализ смазочных масел и смазок

хорошее качество Оборудование для испытания воспламеняемости для сбываний

Это качественное оборудование, предоставленное компанией с отличным обслуживанием клиентов.

—— Дон Хейн

Мы полностью включили камеру воспламеняемости в нашу повседневную деятельность. Камера работает хорошо, и мы очень довольны ей.

—— Свен Фледдерманн

Оставьте нам сообщение

ISO 2977 Aniline Point Test Equipment for Lubricating Oil and Hydrocarbon Solvents

ISO 2977 Aniline Point Test Equipment for Lubricating Oil and Hydrocarbon Solvents

JFTOT Aviation Turbine Fuel Analysis Thermal Oxidation Stability Tester ASTM D3241

ASTM D217 Grease Mechanical Worker for Grease Analysis with Cone Penetromter

ASTM D4170 Fretting Wear Measuring Instrument for Lubricating Greases

ASTM D6184 Oil Separation Sieve for Lubricating Grease by Conical Sieve Method

Анализ смазочных масел и смазок

(51)

ASTM D5293 Apparent Viscosity of Engine Oils Tester Using Cold Cranking Simulator
контакт

Apparent Viscosity of Engine Oils Tester Introduction: Cold Cranking Simulator is used to measure the apparent viscosity of engine oil at low temperature (- 35 ºC ~ - 5 ºC). Method summary: Drive a rotor ... Подробнее

2023-01-09 16:04:34

ASTM D2783 Extreme-Pressure Properties Test of Lubricating Fluids (4 Ball Method)
контакт

Introduction This Extreme-Pressure Properties Test Machine uses four Ф12.7mm standard steel balls evaluate the load-bearing capacity and anti-wear performanceof lubricants (including oil film strength PB, ... Подробнее

2023-01-05 12:29:45

ASTM D1263 Leakage Tendencies Tester for Automotive Wheel Bearing Greases
контакт

ASTM D1263 Leakage Tendencies Tester Introduction Load the sample into the modified front wheel hub and shaft assembly, and let the hub and shaft run for a total of 360±5 min under the specified conditions. ... Подробнее

2022-12-16 15:13:05

ASTM D1264 Water Washout Characteristics Analyzer for Lubricating Grease
контакт

Introduction: This test method covers the evaluation of the resistance of a lubricating grease to washout by water from a bearing, when tested at 38°C and 79°C (100°F and 175°F) under the prescribed laboratory ... Подробнее

2022-09-30 16:44:21

ASTM D1264 Lubricating Grease Water Washout Characteristics Tester
контакт

Lubricating Grease Water Washout Characteristics Tester Introduction: This test method covers the evaluation of the resistance of a lubricating grease to washout by water from a bearing, when tested at 38 °C ... Подробнее

2022-09-30 16:35:58

ASTM D1264 Lubricating Greases Water Washout Characteristics Test Apparatus
контакт

Introduction: This test method covers the evaluation of the resistance of a lubricating grease to washout by water from a bearing, when tested at 38 °C and 79 °C (100 °F and 175 °F) under the prescribed ... Подробнее

2022-09-30 16:34:06

Leakage Tendencies Test Instrument for Automotive Wheel Bearing Grease by ASTM D4290
контакт

I. Introduction: This Leakage Tendencies Test Instrument is applicable to determine Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions. The test grease is distributed in a ... Подробнее

2022-09-01 10:07:12

ASTM D4289 Elastomer Compatibility Instrument for Lubricating Greases and Fluids
контакт

Introduction: This Elastomer Compatibility Instrument is suitable for measuring the compatibility between lubricating grease and standard synthetic rubber. The standard synthetic rubber test piece with the ... Подробнее

2022-07-05 12:03:24

ASTM D 2893 Oxidation Characteristics Test Set for Extreme-Pressure Lubrication Oils
контакт

Introduction: This Oxidation Characteristics Test Set is manufactured according to SH/T 0123-93 standard and is applicable to the determination of extreme pressure lubricating oil (such as gear oil). The use ... Подробнее

2022-07-04 14:30:27

DIN 51568 Lubricating Oils Flow Ability Test Apparatus by U-tube Method
контакт

Summary This Flow Ability Test Apparatus is applicable to determine ability to flow of lubricating oil. The operating principle is to measure the rising speed of lubricating oil in the U-shaped pipe under ... Подробнее

2022-07-01 09:42:10

Page 2 of 6|< << 1 2 3 4 5 6 >> >|